dj (adj) specifications 16a, compact and high insulation power latching relay dj relays (adj) pending vde features 1. variety of contact arrangements wide lineup of 1 form c, 1 form a, 1 form b, 2 form c, 2 form a, 2 form b, 1 form a 1 form b. 2. latching operation latching via a polarized magnetic circuit structure allows remote operation and lower energy consumption 3. compact with high capacity 16a (1-pole type) contact rating in a compact 29 13 16.5 mm (l w h) size. 4. low power consumption 1 coil latching: 150mw 2 coil latching, single side stable: 250mw 5. high insulation both clearance and creepage distance between coil and contact are at 8 mm min. 5. with operation veri?ation function a test button (manual lever) type to facilitate circuit checks is also available (1 form c, 1 form a, 1 form b types only). typical applications ? a equipment (brake circuits of industrial machine and robots, etc.) electric power devices (remote surveillance devices, etc.) household appliance networks (motor control and lighting control, etc.) time switches without test button with test button rohs directive compatibility information http://www.nais-e.com/ contact coil #1 this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. characteristics remarks * 1 with breathing holes open * 2 measurement at same location as ?nitial breakdown voltage section. * 3 detection current: 10ma * 4 wa ve is standard shock voltage of 1.2 50 s according to jec-212-1981 * 5 excluding contact bounce time. * 6 by resistive method, max. switching current * 7 half-wave pulse of sine wave: 11 ms; detection time: 10 s * 8 half-wave pulse of sine wave: 6 ms * 9 detection time: 10 s * 10 refer to 5. conditions for operation, transport and storage mentioned in notes arrangement 1 form c, 1 form a, 1 form b, 1 form a 1 form b, 2 form c, 2 form a, 2 form b initial contact resistance, max. (by voltage drop 6 v dc 1 a) 100 m ? contact material agsno 2 type (1 form c, 1 form a, 1 form b) au-?shed agsno 2 type (1 form a 1 form b, 2 form c, 2 form a, 2 form b) rating (resistive load) nominal switching capacity 16 a 250v ac (1 form c, 1 form a, 1 form b) 10 a 250v ac (2 form c, 2 form a, 2 form b, 1 form a 1 form b) max. switching power 4,000 v a max. switching voltage 250v ac max. switching current 16 a min. switching capacity (reference value) #1 100 ma, 5 v dc expected life (min. operations) mechanical (at 180 cpm) 5 10 6 electrical (resistive load)* 1 (at 20 cpm) 1 form c, 1 form a, 1 form b: 10 5 (at 16a 250v ac) 2 form c, 2 form a, 2 form b, 1 form a 1 form b: : 10 5 (at 10a 250v ac) nominal operating power 1 coil latching 150mw single side stable, 2 coil latching 250mw initial insulation resistance* 2 min. 1,000 m ? (at 500 v dc) initial breakdown voltage* 3 between open contacts 1,000 vrms for 1 min. between contacts and coil 4,000 vrms for 1 min. surge voltage between contact and coil* 4 min. 10,000 v (initial) operate time [set time]* 5 (at nominal voltage) approx. 10ms release time [reset time]* 5 (at nominal voltage) approx. 10ms temperature rise (at 70 c)* 6 max. 55 c shock resistance functional* 7 min. 200 m/s 2 {20 g} destructive* 8 min. 1,000 m/s 2 {100 g} vibration resistance functional* 9 10 to 55hz at double amplitude of 2.0mm destructive 10 to 55hz at double amplitude of 3.0mm conditions for operation, transport and storage* 10 (not freezing and condensing at low temperature) ambient temperature ?0 c to +70 c ?0 f to +158 f humidity 5 to 85% r.h. unit weight approx. 14 g .49 oz all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
dj (adj) ordering information types 1. without test button 1) flux-resistant type contact arrangement coil voltage, v dc single side stable type 1 coil latching type 2 coil latching type part no. part no. part no. 1 form c 5 adj15005 adj11005 adj13005 6 adj15006 adj11006 adj13006 12 adj15012 adj11012 ADJ13012 24 adj15024 adj11024 adj13024 48 adj15048 adj11048 adj13048 1 form a 5 adj25005 adj21005 adj23005 6 adj25006 adj21006 adj23006 12 adj25012 adj21012 adj23012 24 adj25024 adj21024 adj23024 48 adj25048 adj21048 adj23048 1 form b 5 adj35005 please use 1 form a. please use 1 form a. 6 adj35006 12 adj35012 24 adj35024 48 adj35048 1 form a 1 form b 5 adj45005 adj41005 adj43005 6 adj45006 adj41006 adj43006 12 adj45012 adj41012 adj43012 24 adj45024 adj41024 adj43024 48 adj45048 adj41048 adj43048 2 form c 5 adj55005 adj51005 adj53005 6 adj55006 adj51006 adj53006 12 adj55012 adj51012 adj53012 24 adj55024 adj51024 adj53024 48 adj55048 adj51048 adj53048 2 form a 5 adj65005 adj61005 adj63005 6 adj65006 adj61006 adj63006 12 adj65012 adj61012 adj63012 24 adj65024 adj61024 adj63024 48 adj65048 adj61048 adj63048 2 form b 5 adj75005 please use 2 form a. please use 2 form a. 6 adj75006 12 adj75012 24 adj75024 48 adj75048 ex. adj contact arrangement 1: 1 form c 2: 1 form a 3: 1 form b 4: 1 form a 1 form b 5: 2 form c 6: 2 form a 7: 2 form b 1: 1 coil latching, flux-resistant type 2: 1 coil latching, sealed type 3: 2 coil latching, flux-resistant type 4: 2 coil latching, sealed type 5: single side stable, flux-resistant type 6: single side stable, sealed type 0: without test button 1: with test button 05: 5 v 06: 6 v 12: 12 v 24: 24 v 48: 48 v operating function and protective construction auxiliary function coil voltage (dc) note: standard packing: carton: 100 pcs, case: 500 pcs all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
dj (adj) 2) sealed type 2. with test button flux-resistant type contact arrangement coil voltage, v dc single side stable type 1 coil latching type 2 coil latching type part no. part no. part no. 1 form c 5 adj16005 adj12005 adj14005 6 adj16006 adj12006 adj14006 12 adj16012 adj12012 adj14012 24 adj16024 adj12024 adj14024 48 adj16048 adj12048 adj14048 1 form a 5 adj26005 adj22005 adj24005 6 adj26006 adj22006 adj24006 12 adj26012 adj22012 adj24012 24 adj26024 adj22024 adj24024 48 adj26048 adj22048 adj24048 1 form b 5 adj36005 please use 1 form a. please use 1 form a. 6 adj36006 12 adj36012 24 adj36024 48 adj36048 1 form a 1 form b 5 adj46005 adj42005 adj44005 6 adj46006 adj42006 adj44006 12 adj46012 adj42012 adj44012 24 adj46024 adj42024 adj44024 48 adj46048 adj42048 adj44048 2 form c 5 adj56005 adj52005 adj54005 6 adj56006 adj52006 adj54006 12 adj56012 adj52012 adj54012 24 adj56024 adj52024 adj54024 48 adj56048 adj52048 adj54048 2 form a 5 adj66005 adj62005 adj64005 6 adj66006 adj62006 adj64006 12 adj66012 adj62012 adj64012 24 adj66024 adj62024 adj64024 48 adj66048 adj62048 adj64048 2 form b 5 adj76005 please use 2 form a. please use 2 form a. 6 adj76006 12 adj76012 24 adj76024 48 adj76048 contact arrangement coil voltage, v dc single side stable type 1 coil latching type 2 coil latching type part no. part no. part no. 1 form c 5 adj15105 adj11105 adj13105 6 adj15106 adj11106 adj13106 12 adj15112 adj11112 adj13112 24 adj15124 adj11124 adj13124 48 adj15148 adj11148 adj13148 1 form a 5 adj25105 adj21105 adj23105 6 adj25106 adj21106 adj23106 12 adj25112 adj21112 adj23112 24 adj25124 adj21124 adj23124 48 adj25148 adj21148 adj23148 1 form b 5 adj35105 please use 1 form a. please use 1 form a. 6 adj35106 12 adj35112 24 adj35124 48 adj35148 all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
dj (adj) coil data (at 20 c 68 f ) ?single side stable type ?1 coil latching type ?2 coil latching type dimensions mm inch nominal voltage, v dc set voltage, max. v dc (initial) reset voltage, max. v dc (initial) coil resistance, ? ( 10%) nominal operating power, mw max. allowable voltage, v dc 5 3.75 0.5 100 250 6.5 6 4.5 0.6 144 7.8 12 9 1.2 576 15.6 24 18 2.4 2,304 31.2 48 36 4.8 9,216 62.4 nominal voltage, v dc set voltage, max. v dc (initial) reset voltage, max. v dc (initial) coil resistance, ? ( 10%) nominal operating power, mw max. allowable voltage, v dc 5 3.5 3.5 167 150 6.5 6 4.2 4.2 240 7.8 12 8.4 8.4 960 15.6 24 16.8 16.8 3,840 31.2 48 33.6 33.6 15,360 62.4 nominal voltage, v dc set voltage, max. v dc (initial) reset voltage, max. v dc (initial) coil resistance, ? ( 10%) nominal operating power, mw max. allowable voltage, v dc 5 3.5 3.5 100 250 6.5 6 4.2 4.2 144 7.8 12 8.4 8.4 576 15.6 24 16.8 16.8 2,304 31.2 48 33.6 33.6 9,216 62.4 1. 1 form c, without test button general tolerance: 0.3 .012 schematic (bottom view) 1 coil latching typesingle side stable type 2 coil latching type 10.16 .400 13.0 .512 10.16 .400 13.0 .512 10.16 .400 13.0 .512 3.50 .138 3.50 .138 3.5 .138 16.0 .630 15.24 .600 29.0 1.142 1.80 .071 5.08 .200 5.08 .200 6 42 ? 1 + 8 ? 9 ? 8 + 1 6 42 1 coil latching typesingle side stable type 2 coil latching type ? 8 + 1 2 6 4 pc board pattern (bottom view) tolerance: 0.1 .004 2 coil latching type only 15.24 .600 5.08 .200 5.08 .200 5.08 .200 5.08 .200 1.50 dia. 0.59 dia. all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
dj (adj) 2. 1 form c, with test button general tolerance: 0.3 .012 schematic (bottom view) 1 coil latching typesingle side stable type 2 coil latching type 10.16 .400 9.0 .354 9.0 .354 13.0 .512 10.16 .400 13.0 .512 9.0 .354 10.16 .400 13.0 .512 3.50 .138 3.50 .138 3.5 .138 16.0 .630 18.2 .717 6.3 .248 15.24 .600 29.0 1.142 1.80 .071 5.08 .200 5.08 .200 6 42 ? 1 + 8 ? 9 ? 8 + 1 6 42 1 coil latching typesingle side stable type 2 coil latching type ? 8 + 1 2 6 4 mm inch pc board pattern (bottom view) tolerance: 0.1 .004 2 coil latching type only 15.24 .600 5.08 .200 5.08 .200 5.08 .200 5.08 .200 1.50 dia. 0.59 dia. 3. 1 form a, without test button general tolerance: 0.3 .012 schematic (bottom view) 1 coil latching typesingle side stable type 2 coil latching type 1 coil latching type 2 coil latching type single side stable type only 10.16 .400 13.0 .512 10.16 .400 13.0 .512 10.16 .400 13.0 .512 3.50 .138 3.50 .138 3.5 .138 16.0 .630 15.24 .600 29.0 1.142 1.80 .071 5.08 .200 5.08 .200 42 ? 1 + 8 ? 9 ? 8 + 14 2 1 coil latching typesingle side stable type 2 coil latching type + 1 ? 8 6 4 pc board pattern (bottom view) tolerance: 0.1 .004 1 coil latching type 2 coil latching typesingle side stable type 1.50 dia. 0.59 dia. 1.50 dia. 0.59 dia. 2 coil latching type only 15.24 .600 20.32 .800 10.16 .400 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 4. 1 form a, with test button general tolerance: 0.3 .012 schematic (bottom view) 1 coil latching typesingle side stable type 2 coil latching type 10.16 .400 9.0 .354 9.0 .354 13.0 .512 10.16 .400 13.0 .512 9.0 .354 10.16 .400 13.0 .512 3.50 .138 3.50 .138 3.5 .138 16.0 .630 18.2 .717 6.3 .248 15.24 .600 29.0 1.142 1.80 .071 5.08 .200 5.08 .200 single side stable type only 1 coil latching type 2 coil latching type 42 ? 1 + 8 ? 9 ? 8 + 14 2 1 coil latching typesingle side stable type 2 coil latching type + 1 ? 8 6 4 pc board pattern (bottom view) tolerance: 0.1 .004 1 coil latching type 2 coil latching typesingle side stable type 1.50 dia. 0.59 dia. 1.50 dia. 0.59 dia. 2 coil latching type only 15.24 .600 20.32 .800 10.16 .400 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
dj (adj) 5. 1 form b, without test button general tolerance: 0.3 .012 schematic (bottom view) single side stable type 10.16 .400 13.0 .512 3.5 .138 16.5 .650 0.5 .020 15.24 .600 10.16 .400 29.0 1.142 1.80 .071 + 1 ? 8 2 4 mm inch pc board pattern (bottom view) tolerance: 0.1 .004 1.50 dia. 0.59 dia. 10.16 .400 10.16 .400 15.24 .600 6. 1 form b, with test button general tolerance: 0.3 .012 schematic (bottom view) single side stable type 10.16 .400 9.0 .354 6.3 .248 13.0 .512 3.5 .138 16.5 .650 18.2 .717 0.5 .020 15.24 .600 10.16 .400 29.0 1.142 1.80 .071 + 1 ? 8 2 4 pc board pattern (bottom view) tolerance: 0.1 .004 1.50 dia. 0.59 dia. 10.16 .400 10.16 .400 15.24 .600 7. 1 form a 1 form b, without test button general tolerance: 0.3 .012 schematic (bottom view) 1 coil latching typesingle side stable type 2 coil latching type 16.5 .650 0.5 .020 15.24 .600 29.0 1.142 1.80 .071 5.08 .200 5.08 .200 10.16 .400 13.0 .512 10.16 .400 13.0 .512 3.5 .138 3.5 .138 3.5 .138 10.16 .400 13.0 .512 1 coil latching typesingle side stable type 2 coil latching type ? 8 1 + 7 5 43 + 8 1 ? 7 5 43 ? 8 8 ? 9 + 1 7 5 43 pc board pattern (bottom view) tolerance: 0.1 .004 2 coil latching type only 15.24 .600 5.08 .200 5.08 .200 5.08 .200 5.08 .200 1.50 dia. 0.59 dia. all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
dj (adj) 8. 2 form c, without test button general tolerance: 0.3 .012 schematic (bottom view) 1 coil latching typesingle side stable type 2 coil latching type 10.16 .400 13.0 .512 10.16 .400 13.0 .512 3.5 .138 3.5 .138 3.5 .138 10.16 .400 13.0 .512 16.5 .650 0.5 .020 15.24 .600 29.0 1.142 1.80 .071 5.08 .200 5.08 .200 1 coil latching typesingle side stable type 2 coil latching type ? 8 1 + 7 2 6 5 34 + 8 ? 1 3 6 7 2 5 4 ? 8 ? 9 + 1 7 2 6 5 43 mm inch pc board pattern (bottom view) tolerance: 0.1 .004 2 coil latching type only 15.24 .600 5.08 .200 5.08 .200 5.08 .200 5.08 .200 1.50 dia. 0.59 dia. 9. 2 form a, without test button general tolerance: 0.3 .012 schematic (bottom view) 1 coil latching typesingle side stable type 2 coil latching type 10.16 .400 13.0 .512 10.16 .400 13.0 .512 3.5 .138 3.5 .138 3.5 .138 10.16 .400 13.0 .512 16.5 .650 0.5 .020 20.32 .800 29.0 1.142 1.80 .071 5.08 .200 1 coil latching typesingle side stable type 2 coil latching type ? 8 1 + 6 5 43 + 8 1 ? 6 5 43 ? 8 ? 9 + 1 6 5 34 pc board pattern (bottom view) tolerance: 0.1 .004 2 coil latching type only 20.32 .800 5.08 .200 5.08 .200 5.08 .200 1.50 dia. 0.59 dia. 10. 2 form b, without test button general tolerance: 0.3 .012 schematic (bottom view) single side stable type 10.16 .400 13.0 .512 3.5 .138 16.5 .650 0.5 .020 15.24 .600 10.16 .400 29.0 1.142 1.80 .071 single side stable type ? 8 1 + 7 2 5 4 pc board pattern (bottom view) tolerance: 0.1 .004 1.50 dia. 0.59 dia. 10.16 .400 10.16 .400 15.24 .600 all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
dj (adj) reference data notes 1. max. switching capacity 2. temperature rise sample: adj12024, 6 pcs. coil applied voltage: 0 %v, contact current: 16 a, 20 a measured portion: contact, ambient temperature: 25 c 77 f , 85 c 185 f 3. coil temperature rise sample: adj56024, 6 pcs. coil applied voltage: 100 %v, 130 %v of rating contact current: 0 a, 10 a measured portion: inside the coil, ambient temperature: room temperature, 70 c 158 f contact voltage, v 100 100 1,000 100 10 ac resistive load (2-pole) ac resistive load (1-pole) contact current, a 5 10 20 35 40 contact current, a temperature rise, c 010 25 0 15 25 30 51520 +25 c +85 c 50 40 30 20 10 0 90 100 110 120 130 140 coil applied voltage, %v temperature rise, c 10a room temperature 10a 70 c 0a room temperature 0a 70 c 4. set and reset time sample: adj12024, 10 pcs coil applied voltage: 80 %v, 100 %v, 120 %v of rating 5. ambient temperature characteristics sample: adj12024, 6pcs ambient temperature: ?0 c to 85 c ?0 f to 185 f 6. in?ence of adjacent mounting sample: adj12024, 6pcs ambient temperature: room temperature 5 10 20 30 coil applied voltage, %v set and reset time, ms 70 90 130 0 15 25 80 100 110 120 max. min. x ?0 10 20 30 ?0 ?0 ?0 ?0 ?0 0 4020 60 80 100 ambient temperature, c change rate to nominal v, %v set reset 1210864 02 ? 0 5 off off off ? 0 5 reset voltage change rate to nominal v, %v distance between relays , mm set voltage 1. coil operating power pure dc current should be applied to the coil. the wave form should be rectangular. if it includes ripple, the ripple factor should be less than 5%. however, check it with the actual circuit since the characteristics may be slightly different. 2. coil connection when connecting coils, refer to the wiring diagram to prevent mis-operation or malfunction. 3. soldering we recommend the following soldering conditions soldering: 260 c? c 500 f?1 f , max. 6 s 4. others 1) if the relay has been dropped, the appearance and characteristics should always be checked before use. 2) the cycle lifetime is de?ed under the standard test condition speci?d in the jis* c 5442-1996 standard (temperature 15 to 35 c 59 to 95 f , humidity 25 to 85%). check this with the real device as it is affected by coil driving circuit, load type, activation frequency, activation phase,ambient conditions and other factors. also, be especially careful of loads such as those listed below. ?when used for ac load-operating and the operating phase is synchronous. rocking and fusing can easily occur due to contact shifting. ?high-frequency load-operating when high-frequency opening and closing of the relay is performed with a load that causes arcs at the contacts, nitrogen and oxygen in the air is fused by the arc energy and hno 3 is formed. this can corrode metal materials. three countermeasures for these are listed here. ?incorporate an arc-extinguishing circuit. ?lower the operating frequency ?lower the ambient humidity 3) for secure operations, the voltage applied to the coil should be nominal v oltage. in addition, please note that pick- up and drop-out voltage will vary according to the ambient temperature and operation conditions. 4) heat, smoke, and even a ?e may occur if the relay is used in conditions outside of the allowable ranges for the coil ratings, contact ratings, operating cycle lifetime, and other speci?ations. therefore, do not use the relay if these ratings are exceeded. also, make sure that the relay is wired correctly. 5) incorrect wiring may cause unexpected events or the generation of heat or ?mes. 6) check the ambient conditions when storing or transporting the relays and devices containing the relays. freezing or condensation may occur in the relay, causing functional damage. avoid subjecting the relays to heavy loads, or strong vibration and shocks. all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
dj (adj) for cautions f or us e , see rel a y t e c hnical in f ormation. 5. usage, transport and storage conditions 1) ambient temperature, humidity, and atmospheric pressure during usage, transport, and storage of the relay: ? emperature: ?0 to +70 c ?0 to +158 f humidity: 5 to 85% rh (avoid freezing and condensation.) the humidity range varies with the temperature. use within the range indicated in the graph below. atmospheric pressure: 86 to 106 kpa temperature and humidity range for usage, transport, and storage 2) condensation condensation forms when there is a sudden change in temperature under high temperature and high humidity conditions. condensation will cause deterioration of the relay insulation. 3) freezing condensation or other moisture may freeze on the relay when the temperatures is lower than 0 c 32 f . this causes problems such as sticking of movable parts or operational time lags. 4) low temperature, low humidity environments the plastic becomes brittle if the relay is exposed to a low temperature, low humidity environment for long periods of time. 6. test button (manual lever) operation the relay contacts switch over as follows: humidity, %rh te mperature, c f tolerance range 85 5 0 +32 70 +158 ?0 ?0 (avoid freezing when used at temperatures lower than 0 c 32 f (avoid condensation when used at temperatures higher than 0 c 32 f 2-4 terminal 4-6 terminal all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
|
